For larger spaces such as factories and warehouses and outdoor spaces, MovinCool’s Classic 60 can provide flexible, mobile or temporary spot industrial cooling. With multiple T-section drops, you can customize an adaptable cooling solution for your manufacturing or assembly lines. Add casters to the industrial air conditioning unit and you can move the cool air as your assembly or process line changes. This flexibility makes Classic 60 portable air conditioners truly cost-effective solutions for all applications.
By cooling only the area that needs it, the Classic 60 saves you money while protecting people and equipment and speeding up processes. Installation of this unit does not require specialized training. Contact your local MovinCool dealer today to inquire about purchase or rental of portable air conditioner units for industrial use. Your local dealer can be found using the online dealer locater. To learn more about Classic 60, please view the available downloads now. When you need a tough solution for a difficult-to-cool area, use the Classic 60.
Classic 60 Accessories
 |
| ACCESSORIES – ARE NOT INCLUDED WITH THE UNIT |
| No. | Part Name | Classic 60 – Part Description | Part Number |
| 1 | Cold Air Flange Kit | 12″ diameter gray metal flange with wire clamp and mounting screws. | 481170-0191 |
| 2 | Chamber Extender | Gray metal cylinder raises exhaust air chamber 16″ above unit. | 481849-1431 |
| 2A | Chamber Extender Flange Kit (not shown) | Gray metal flange connects chamber extender to unit. Must order quantity of 2 per each Chamber Extender used. | 481170-0090 |
| 3A | Three-way Chamber (not shown) | Diverts airflow in three directions. Use 6″ extension ducts. | 481769-0051 |
| 3 | Two-way Chamber | Insulated gray plastic chamber diverts airflow in two directions. Use 6″ extension ducts. | 481769-0041 |
| 3A | Reducer Flange Kit | Gray metal flange converts mounting holes on Classic 60 for two or three-way chamber and chamber extender flange.” | 481170-0151 |
| 4 | Cold Air Extension Duct | 6″ adjustable diameter, white plastic duct that extends from 6-1/2′ to 10′ in length. | 481744-0030 |
| 5 | Trim Ring | 6″ diameter black plastic ring mounts as end caps for extension duct. | 481851-0210 |
| 6 | Cold Air Extension Duct | 12″ diameter white, plastic duct that extends 6-1/2′ to 10′ in length | 481744-0060 |
| 9 | Caster Kit | Four casters and wrench. | 484709-0011 |
| 10 | Remote Control Kit | Kit includes remote control box and installation hardware. Use six 18AWG plus one ground wire (wire not included). | 484500-0431 |
Classic 60 Specifications
| Electronic Features | |
| Control Panel | Digital |
| Thermostat | Mechanical |
| Cooling Capacity | |
| Rating Conditions: 95F at 60% RH | 60,000 Btu/h |
| Electrical Characteristics | |
| Voltage Requirement | 3 Phase, 460V |
| Current Consumptiont | 5.9 kW |
| Current Consumption | 8.8 amps |
| Recommended Fuse Size | 20 amps |
| NEMA Plug Configuration | N/A |
| Min. Max. Voltage | 440 – 480 |
| Fans | |
| Motor Output | 0.75 kW Evap. / 0.40 kW Cond. |
| Evaporator | |
| Fan Type | Centrifugal |
| Max. Air Flow high/low | 1580 CFMM |
| Max. External Static Pressure | 1.35 IWG |
| Condenser | |
| Fan Type | Propeller |
| Max. Air Flow high/low | 3800 CFM |
| Max. External Static Pressure | 0.05 IWG |
| Compressor | |
| Type | Hermetic Reciprocal |
| Output | 3.89 kW |
| Refrigerant | |
| R-410A | 5.9 lb |
| Dimensions | |
| W x D x H | 32 x 49 x 42 in |
| Net Weight/Shipping Weight | |
| 474/566 lb | |
| Power Cord | |
| Gauge | N/A |
| Length | N/A |
| Condensate Tank Capacity | |
| 2@ 5 gal (optional) | |
| Operating Conditions | |
| Min. Max. (@ 50% RH) | 75° – 115°F |
| Max. Duct Length | |
| Per Cold Duct Hose | Varies |
| Hot Duct Hose | 40 ft |
| Max. Sound Level | |
| With Condenser – Duct high/low | N/A |
| Without Condenser – Duct high/low | 72 dB(A) |
| NOTE: All specifications subject to change without notice. |
